RALL MILL

Ball mill

Type T Tube Ball Mill can grind materials to a fineness of minus 200 mesh, and is used as a secondary grinding mill after the Type C or Type G Ball Mill.
Type T Ball Mills are to produce a finished product from relatively fine feed in an open or closed circuit.
These mills are equipped with thinner shell liners and employ smaller size grinding balls than that of Type C Ball Mill.

Type T Tube Ball Mill specification

Model No.	Size of Drum Dia x Length (mm)	Capacity(t/h)		Drum (R.P.M)	Motor (kw)
		Feed. 10mesh Prod 100mesh	Feed. 20mesh Prod 200mesh
T-915	900 × 1,500	0.78	0.60	38	15
T-918	900 × 1,800	0.92	0.71	36	19
T-924	900 × 2,400	1.20	0.93	36	22
T-930	900 × 3,000	1.47	1.13	36	30
T-1218	1,200 × 1,800	2.02	1.56	32	30
T-1224	1,200 × 2,400	2.68	2.06	31	37
T-1230	1,200 × 3,000	3.27	2.52	31	45
T-1236	1,200 × 3,600	3.87	2.98	31	55
T-1524	1,500 × 2,400	5.00	3.86	28	55
T-1530	1,500 × 3,000	6.20	4.78	27.5	75
T-1536	1,500 × 3,600	7.30	5.63	27.5	75
T-1542	1,500 × 4,200	8.50	6.53	27.5	95
T-1830	1,800 × 3,000	10.40	8.00	25	95
T-1836	1,800 × 3,600	12.40	9.50	25	110
T-1842	1,800 × 4,200	14.30	11.00	25	150
T-1848	1,800 × 4,800	15.90	12.20	25	150
T-2148	2,100 × 4,800	25.70	19.80	25	220
T-2154	2,100 × 5,400	29.00	22.40	23	220
T-2448	2,400 × 4,800	36.40	28.00	21	300
T-2460	2,400 × 6,000	44.70	34.00	21	370

※ Capacities are based upon ordinary limestone not containing wet fine particles. Ton=1,000 kg.

Conical ball mill

Type C Conical Ball Mill has been proved to be a very efficient machine for grinding ore or many other materials in metal mines and other fields. It can grind 8 to 12mm size ore to particles as fine as 50 to 100 mesh.
The conical ball mill operates on the same principle as an ordinary ball mill; however, due to its conical shaped drum, effective size classification of the grinding media-the section of greatest diameter being the largest for coarser grinding and a gradual reduction towards the discharge end for fine-can be obtained. V-belt or directly connected drives can be furnished to the individual requirements for a particular installation.

Grate ball mill

Type G Grate Ball Mill is a cylindrical mill equipped with grate and lifter at the discharge end, designed to be most efficient for coarse grinding in an open or closed circuit with a SAND CLASSIFIER.
Type G Ball Mill can handle 25mm feed. To grind such a large feed efficiently, it comes equipped with thick shell lining and large balls.

Compartment tube mill

Type P Compartment Tube Mill is basically a kind of Type T Ball Mill. The drum is divided into two to four compartments.
The initial or primary grinding compartment is lined with thick liners and carries large balls to accomplish the coarse grinding, while one or more of the secondary compartments are provided with thinner lining and smaller balls. It is suitable for dry grinding in open circuit of calcium cyanamide calcium carbide, cement clinker etc.